General Informations:
LF0200 is a high molecular weight low density polyethylene film grade combining good
flexible extrusion behavior and superior mechanical properties. Film made from LF0200
exhibits high dart impact combined with excellent yield and tensile strength and high
stiffness. Its toughness bears even in cold temperatures. The film can be sealed on all types of
machines.The film possesses good dimensional stability and is resistant to tearing and
breaking. LF0200 contains antioxidant.

Applications:
LF0200 is well suited for wide range of applications due to its unique balance of properties.
The superior mechanical properties will improve the functionability of the films. Examples;
general purpose bags, packaging of mechanical parts, carrier bags, coextruded milk bags, low
tension power cables insulation and industrial injection mouldings.

Processing Conditions:
LF0200 can be easily processed in all types of extruders. The temperature of the polymer
at the die output should be in the range of 160-180 oC. Minimum blow up ratio should be
about 2 in order to keep a good balance of mechanical properties. To avoid blocking and
shrinkage in the reel, the film temperature at the nip rollers and haul off should be kept as
close as possible to the ambient temperature.

Storage:
The product should be stored in dry conditions at temperature below 60 oC and protected
from UV light.Improper storage can initiate degradation with resulting odour generation and
colour changes.

Health & Environment:
LF0200 is not classified as a dangerous product.Dust and fines from the product may give
a risk for dust explosion. All equipment should be properly grounded. Inhalation of dust may
irritate the respiratory system and should be avoided. During processing of the product small
amounts of fumes are generated, which require proper ventilation.

Recycling:
The product is suitable for recycling using modern methods of shredding and cleaning for
other applications only if approved in the relevant standard or specification. In-house
production waste should be kept clean to facilitate direct recycling.
Dumping and land filling is also possible in agreement with the competent authorities.

Food Contact: The composition of products complies with the EC Directive 90.128.EEC for use in food contact applications.